Working With Autocad - Wacom Intuos GD-0405-R User Manual

WORKING WITH AUTOCAD

AutoCAD for Windows can support the Intuos tablet as a System Pointing Device or as a Wintab
Compatible Digitizer. By default, AutoCAD is configured to use Intuos as a System Pointing Device. If you
will be using Intuos with tablet menus or to digitize drawings to proper scale, you will need to follow the
procedures below.
CONFIGURING FOR A WINTAB COMPATIBLE DIGITIZER
For AutoCAD Release 14:
1. Start AutoCAD. From the D
2. From the P
REFERENCES
3. From the list of available digitizers, select the Wintab compatible digitizer option.
4. Click on S C
ET URRENT
5. Decide from which device AutoCAD will accept input. Choose an option from the A
section:
• D O
IGITIZER NLY
• D
IGITIZER AND
mouse.
6. Click OK to close the P
E
RAWING DITOR
window, select the P
to activate the selection.
. The AutoCAD drawing editor only accepts input from Intuos.
M . The AutoCAD drawing editor accepts input from both Intuos and your
OUSE
window.
REFERENCES
Contents
Index
, open the T menu and select P
OOLS
tab.
OINTER
.
REFERENCES
I F
CCEPT NPUT ROM
APPENDICES
Page 126