Intuos4 Lens Cursor - Wacom Intuos4 Large User Manual

INTUOS4 LENS CURSOR

Available for Intuos4 L and XL tablet models, the lens cursor is an ideal tool for entering precise coordinate
position information into your computer. The lens cursor reports the position of the cross-hair to the
computer. This makes the lens cursor especially useful for digitizing drawings into graphics and CAD
applications.
Lens
Rotate for best viewing angle.
Left button
This is the primary button used to
C and select.
LICK
The default button positions are:
Left: C
LICK
Right: R C
IGHT LICK
Middle: M C
IDDLE
Left rear: B
ACK
Right rear: F
ORWARD
See also customizing the lens
Mouse mode settings
Contents
LICK
cursor.
The default setting for the Intuos4 Lens Cursor is M
to move the screen cursor with a "pick up and slide" action similar to using a
traditional mouse. When using the lens cursor to digitize a drawing, the lens
cursor must be set to P
Important: When the lens cursor is not in use, place it on your desk.
Leaving an Intuos4 tool on the tablet may interfere with screen cursor
positioning when using other pointing devices.
For order information on this and other available Intuos4 tools, see
parts and
Contents
Index
mode.
EN
accessories.
Index
Middle button
Press to perform a M
IDDLE
Right button
Displays a context menu when
pressed.
Left and right rear buttons
These are set for B
ACK
F functionality within your
ORWARD
Internet browser.
mode, enabling you
OUSE
Application-specific settings
75
C .
LICK
and
ordering
75