Wacom Intuos4 Large User Manual page 46

Function name
P H
RESSURE OLD
P M
RECISION ODE
D T
ISPLAY OGGLE
S S
HOW ETTINGS
M T ...
ODE OGGLE
D
ISABLED
S
KIP
D
EFAULT
Contents Index
Description
Locks the pressure at the current pressure level until the button is released.
For example, you can paint with pressure sensitivity until you reach the brush size
that you like. You can then press the button and continue painting with the same
size brush until the button is released.
Changes the mapping around the current pen tip position such that you must move
the pen twice as far for the screen cursor to cover the same distance on the display
screen. To activate, press and hold the tool button to which this function is
assigned. Releasing the button returns to normal mapping.
When your tool is in M
acceleration were off and speed set to slow.
For multiple monitor systems. Enables you to toggle the current tablet mapping and
screen cursor between different displays when you press an ExpressKey that has
been assigned this function. See
Displays a diagram of the tablet ExpressKeys and Touch Ring, showing the current
function settings for each control.
Toggles between
M T ..., the M
ODE OGGLE
mouse acceleration and speed.
Sets the screen cursor tracking
speed when in M
OUSE
Sets the screen cursor acceleration
when in M mode.
OUSE
Note: M mode settings can be accessed from a number of different locations
OUSE
within the control panel. However, for each input tool and application that you are
customizing, only one M
Disables the control function.
Sets the Touch Ring toggle button to skip a function state that has been assigned
this option in the toggle sequence.
Returns a control to its default setting.
Contents Index
mode, screen cursor movement is adjusted to act as if
OUSE
working with Display
P mode and M mode. When first setting a tool button to
EN OUSE
M dialog box is displayed where you can adjust the
OUSE ODE
mode.
A
OUSE CCELERATION
Toggle.
and S setting can be made.
PEED
46
46