WACOM Co., Ltd. Table of contents 1. SCOPE ................................2 2. SUMMARY ..............................2 3. PRECAUTIONS ON USE AND HANDLING ....................2 4. CAUTIONS FOR USING STU-500B ......................5 5. PRODUCT SPECIFICATION ...........................6 ............................6 5-1 G ENERAL PECIFICATIONS ................................6 5-2 C OMPLIANCE ................................
LCD signature tab let to malfunction. Where use is prohibited, power off the STU-500B to prevent the possibility of it causing other electronic devices to malfunction. Wacom does not accept any liability for direct or consequential damages.
Page 4
Handling WARNING If using a power adapter with the STU-500B, only use the power adapter (Serial kit FUZ-A147) that designed for use with the STU-500B. If a different type of power adapter is used, the LCD signature tablet will not work properly or may be damaged.
Page 5
WACOM Co., Ltd. blotching occurs, leave the STU-500B’s display on and the blotching should disappear within a few hours. Wacom LCD signature tablet products comply with the European Union RoHS Directive 2002/95/EC (RoHS Directive). Federal Communications Commission (FCC) notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
2) This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 4. Cautions for using STU-500B Connecting the tablet The STU-500B can be connected to a host computer via a USB or serial cable. However, do not connect both USB and serial cables simultaneously. Power supply The STU-500B is designed to be powered by your computer's USB port.
WACOM Co., Ltd. 5. Product specification 5-1 General Specifications Main body exterior color Dark gray Size 160.0mm(W) X 182.5mm(D) X 24.6mm(H) Mass 400g Pen holder Tray and penholder hole Main body fixation Bottom fixation hole Status display Power Supply Voltage +5V DC 2.6 W Max...
WACOM Co., Ltd. 5-3 Coordinate Coordinate Specifications Technology Electro-magnetic resonance technology Active Area 103.76 X 78.32 mm Maximum Coordinate (X)10376 (Y)7832 Resolution 0.01mm(2540ppi) ±0.5mm(tilted ±50°from vertical) Coordinate Accuracy Accuracy Assurance Height 0mm(Height from the protective plate) Reading Height 5mm or more(Height from the protective plate) Tilt range *1) ±50 degrees (from vertical)
1 pcs 6-2 Optional Serial kit (FUZ-A147-01/-02/-03) This option is for serial connection. Serial kit contain AC adaptor, AC cable and RS-232C cable(1.5 Note) This optional serial kit is not included in STU-500B and provided separatly. FUZ-A147-01 Europe (except UK)
WACOM Co., Ltd. 6-3 Pen Specification NAME MODEL NUMBER REMARK Main body UP-610-74A-1 Electronic pen Φ9×140.5 mm Physical dimensions Weight 11 g Color Dark gray Rear case Material Color Dark gray Front case Material Color Dark gray Material Color White...
WACOM Co., Ltd. 7. Fixing STU-500B STU-500B can be fixed on the table etc. Please refer for fixing STU-500B. The following; wood screw is recommended for fixing. Φdk Φk Φ dk: 4 ~ 5.8mm K: Less than 2mm L: 10mm is recommended (more than 10mm) Φ...
Page 13
WACOM Co., Ltd. Dimension of screwing (Top view)
Page 14
Put STU-500B on the table and screws are match with fixation hole of STU-500B Please make sure that STU-500B isn’t lifted up or stressed. It may cause of damage of inside or case. Note) If STU-500B is stressed or tight, don’t force to fix. Please adjust height of screws again.
Prevent children from swallowing the pen tip. The pen tip (nib) may accidentally be pulled out if children are biting on them. In the unlikely case a nib becomes angular due to wear off, it may damage the coating on the STU-500B display screen. To avoid any damage, nib replacement is recommended in this case.
And Thread the other end of the pen tether through a lope of opposite pen tether end. b) Thread the end of the pen tether through the pen tether hole on the back side of STU-500B. And thread the pen through the end lope of the pen tether.