Table of Contents
Advertisement
G1079R
Refer to Figures 7–9 and the following descrip-
tions to become familiar with the basic con-
trols
and components of the Model G1079R.
Understanding these items and how they work will
help you understand the rest of the manual and
stay safe when operating this machine.
A
B
C
Figure 7. G1079R ON/OFF buttons.
A. ON Button: Push to start motor. Insert pad-
lock through button to disable (padlock not
included).
B. OFF Button: Push to stop motor.
C. Circuit Breaker Reset Button: Circuit
breaker trips if motor draws excessive current
and overheats. Push to reset circuit breaker
after allowing machine to cool down.
E
Figure 8. G1079R front controls.
D. Conveyor Height Crank Handle: Rotate to
raise or lower conveyor table according to
workpiece thickness.
-8-
E. Depth-of-Cut Scale: Indicates distance
F.
G. Rear Sanding Drum: Cylindrical drum with
H. Front Sanding Drum: Cylindrical drum with
D
F
between conveyor table and sanding drums.
Conveyor Table w/Belt: Height-adjustable
table with conveyor belt that feeds workpieces
toward sanding drums.
Figure 9. G1079R sanding drums.
machined surface that is covered in felt.
Typically wrapped with fine grit sandpaper to
perform finish sanding portion of operation.
machined surface. Typically wrapped with
coarse grit sandpaper to perform thickness
sanding portion of operation.
Model G1066R/Z/G1079R (Mfd. Since 02/24)
G
H
Advertisement
Table of Contents
