Honda HS828 Manual page 23

HS928
• PERFORMANCE TEST
CAUTION:
[ Perform this test on the asphalt is wet.
1) Start the engine and adjust the maximum engine speed (P.
3-9).
Maximum engine speed: 3,600
±
150 min-1 (rpm)
2) Run the snowblower at maximum speed for a few minutes to
raise the oil temperature in the hydrostatic transmission.
3) Position the shift lever to obtain the following speed:
DISTANCE TIME
1 m (3.3 ft) 5-8 second
4) Place the snowblower against the wall as shown, and position
the shift lever as 1n step 3.
5) Check that the tracks slip aga1nst the floor when the drive
clutch 1s engaged.
CAUTION:
LDo. not slip the tracks for mor':_ than fiv' - ' e "' - ' m :::i:::n_:u.:_te,s:::· ______
___J
HONDA
HSB2B
NEUTRAL (N)
SHIFT LEVER
WOOD
BLOCK