Honda HS828 Manual page 22

HONDA
HSB2B
3) Chute does not operate.
(Up and down)
HS928
• Damaged of faulty adjustment of the chute guide cable.-----+- Adjustment P.
3-5
Replace P 17-2
Emergency procedure:
Remove the chute guide cable adjustment nut, and remove the chute guide bolts.
Remove the collars between the chute guide and its bolts. Set the angle of the chute guide as desired.
Tighten the chute guide bolts and adjustment nut in order to fix the chute guide.
I - -
{Right and left)
SERVICE BULLETIN #19
=>
• Incorrect clearance between chute drive gear and the chute ring
gear. Adjust P. 1 1-2
• Damaged or worn chute g e a r s . - - - - - - - - - - - - - - - - Replace P. 11-1
• Broken pins of the chute crank. Replace P. 11-1
Emergency procedure:
Remove the chute drive gear bracket. Set the angle of the chute as desired and install the chute drive gear bracket.
4) Snow is not thrown from the chute.
• Clogged snow in the
chute.----------------4~
Remove the snow using a stick.
• Broken blower shear bolt. Replace P. 1 2-1
• Cut auger belt. Replace P. 13-1
5) Abnormal sound is heard or abnormal vibration is ielt.
• Loosen each bolt and n u t . - - - - - - - - - - - - - - - - - Retighten.
6) Track slips.
•
Track tension is i n s u f f i c i e n t . - - - - - - - - - - - - - - - - Adjust P. 3-4
- - - - - - - - - - - - - - - - - -