8.
Remove the screws securing front panel to
lower louvered panel.
9.
Remove the nuts securing rear of cooking
compartment to the vertical mounting brackets
(four places - located between cooking
compartment and steam generator).
10. Remove cooking compartment assembly.
11. If removed or replacing cooking compartment,
install insulation around cooking compartment.
Secure insulation into position using high
temperature aluminum foil tape.
12. Reinstall parts removed in reverse order.
13. Check DOOR LATCH ADJUSTMENT.
F25213 (May 2006)
MODEL C24EA - COOKING COMPARTMENT
Page 14 of 52