Heat & Glo TRUE-36G-IFT Installation Manual page 56

BEND TABS BEND TABS
LEFT SIDE SPACER LEFT SIDE SPACER
Figure 11.12 Left Refractory Tab
7. Place back glass panel with arched portion down into
the rear of the appliance. See Figure 11.13. Slide the
white side spacers toward the rear of the appliance
until they contact the rear glass panel.
LEFT LEFT
SIDE SIDE
SPACER SPACER
Figure 11.13 Installed Black Glass Rear Panel
8. Slide left glass panel into the appliance until it con-
tacts the rear glass panel. Ensure the notch is on the
bottom side. Bend the refractory tabs over to retain
the glass. See Figure 11.14.
9. Slide right glass panel into appliance until it contacts
the rear glass panel. Bend the refractory tabs over to
retain the right glass panel. See Figure 11.15.
10. Place tabs of the 昀椀nish trim behind the white side
spacer and refractory tab. Push the 昀椀nish trim into
place until it is 昀氀ush with the outside of the 昀椀rebox.
See Figures 11.16 and 11.17. Repeat for opposite
side.
56 Heat & Glo • TRUE-36-IFT, TRUE-42-IFT, TRUE-50-IFT Installation Manual • 2461-980 Rev. Y • 6/23
Figure 11.14 Left Refractory Tab
RIGHT RIGHT
SIDE SIDE
SPACER SPACER
Figure 11.15 Right Refractory Tab
Figure 11.16 Upper Right Finish Trim
BEND TABS TO RETAIN GLASS BEND TABS TO RETAIN GLASS
BEND TABS TO RETAIN GLASS BEND TABS TO RETAIN GLASS