Table of Contents
Advertisement
Tips for use on the road
Activate the DWC, select level 4 and ride the
motorcycle in your usual style; if the level of DWC
sensitivity seems excessive, try levels 3, 2, etc., until
you find the one that suits you best. If changes occur
in the circuit characteristics, and the level setting is
no longer suitable, switch to the next level up or
down and proceed to determine the best setting
(e.g. if with level 3 the DWC intervention seems
excessive, switch to level 2; alternatively, if on level 3
you cannot perceive any DWC intervention, switch to
level 4).
Recovery in case of error
If a DWC fault occurs while the DTC system is
switched on, a specific function is activated to inform
the user of the fault in good time. This function is a
modulation of the power output that will be active
during use from the moment the system goes into
fault until the vehicle is switched off. During this
riding phase, an error message will be present in the
instrument panel. After the vehicle is switched off,
when the vehicle is switched back on, if the system is
still in error, power modulation will no longer be
present but the error status will still be signalled. In
144
any situation, if the system is switched off by the
user, no power modulation will be applied other than
that requested by the user.
Advertisement
Table of Contents
