Table of Contents
Advertisement
SETTING MENU - BATT.
This function allows the battery voltage to be
displayed.
From the main screen, select "SETTING MENU"
●
via buttons (1) and (2) and press the ENTER
button (3).
Select the "BATT." item (A) and press ENTER (3).
●
The battery voltage is displayed (B).
This function does not allow changes, to exit hold
button (2) pressed for a long time.
If the battery voltage is between 11.0 and 11.7 volts or
between 15.0 and 16.0 volts, the battery data is
displayed flashing.
If the battery voltage is less than 11.0 volts, "LOW" is
displayed instead of the battery data.
If the battery voltage is higher than 16.0 volts,
"HIGH" is displayed instead of the battery data.
A
B
1
2
3
Fig 105
173
Advertisement
Table of Contents
