TYRE - DEFAULT
This function is only available if a calibration has
already been carried out.
When entering the function using buttons (1) and (2),
select the flashing message "DEFAULT" (E) and
press ENTER (3). The instrument panel will display
"WAIT" (F) for a few seconds, followed by "OK" for 2
seconds, and then it will return to the previous
screen.
Attention
Changing the final drive ratio is only allowed for
circuit (racetrack) use of the motorcycle, not on
public roads.
Attention
In the event of front sprocket and/or rear
sprocket replacement, after performing the "Tyre
Calibration" procedure, it is necessary to go to an
authorised Ducati dealer who will perform a "drive
adaptive system reset" with the diagnosis
instrument. This allows you to avoid false plausibility
diagnoses related to the final drive ratio
modification.
E
F
Fig 110
Fig 111
179