Page 1
WhatsApp community↑ J3L211BS01 J3L211GR01 As this item contains many parts, please read the installation instruction carefully before installation . Please use tools properly and carefully. If you have any questions about the product and installation, please contact us. service@vabchesofficial.com Our professional after-sales team will serve you online all day.
Before You Start Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware of to slow down and stop when screw is tight.
Board Identification Not actual size BOTTOM BOARD FIXED SHELF Qty:1 Qty:1 Qty:1 PARTITION LEFT SIDE PANEL RIGHT SIDE PANEL Qty:1 Qty:1 Qty:1 LEFT FRONT LEG PARTITION REAR PULL BAR Qty:1 Qty:2 Qty:1 RIGHT FRONT LEG RIGHT HIND LEG LEFT HIND LEG Qty:1 Qty:1 Qty:1...
Page 4
Board Identification Not actual size DRAWER LEFT SIDE MIDDLE FOOT DRAWER FRONT Qty:2 Qty:1 Qty:2 DRAWER RIGHT SIDE DRAWER BACK PANEL DRAWER BOTTOM Qty:2 Qty:2 Qty:2 4/26...
Part List Ø15X9.5mm Ø6X35mm Ø8X30mm Ø6X30mm CAM LOCK CAM BOLT WOOD DOWEL WOOD DOWEL spare:3 spare:3 spare:3 spare:1 12" 12" Ø4X35mm Ø3.5X14mm 300mm 300mm SCREW SCREW LEFT CABINET MEMBER RIGHT CABINET MEMBER spare:2 spare:2 12" 12" M4X8mm 300mm 300mm LEFT DRAWER RUNNER RIGHT DRAWER RUNNER SCREW HANDLE...
Page 6
Part List Ø3X12mm Ø4X65mm(25mm) 23*7*5mm SCREW TOOL GLUE CRIMPING BUCKLE spare:1 Cam Lock Fastening System Insert the cam bolt into the hole first, then insert the cam lock and lock it. The opening must point toward the edge of the board 6/26...
Page 7
Board Identification Not actual size 7/26...
Page 19
STEP12 Ø4X35mm Wooden Dowel Hole for wooden dowel Use one drop of glue before the wooden dowel 19/26...
Page 20
STEP13 Ø15X9.5mm Ø4X65mm(25mm) The space here is relatively small, and tool 16 is recommended Wooden Dowel Hole for wooden dowel Use one drop of glue before the wooden dowel Proper orientation of CAM LOCK 20/26...
Page 21
STEP14 23*7*5mm Ø3X12mm X1set Keep the plates clean and dust-free before following the strip light Tear off the sticker of the number 10 light strip Step 1 Step 2 Do not hold the Step 3 Step 3 lamp beads 21/26...
Page 22
STEP15 Ø15X9.5mm Ø6X35mm Ø21mm 180° Use one drop of glue before the wooden dowel Wooden Dowel Hole for wooden dowel Proper orientation of CAM LOCK 22/26...
Page 26
STEP19 X1set RGB LED Controller Instrustions You can use the switch or remote to control the lighting effects. Description of switch function 1. Power on/off:Press and hold the power button. 2.Change the mode:Short press the cycle button.(Multiple mode options:Static Red/Static Green/Static Blue/Static White/Multicolor Blinking/Multicolor Breathing/Red Breathing/Blue Breathing/Green Breathing) 3.Adjust the flashing speed:Short press the power button.