Table of Contents
Advertisement
Audio. dubbing
HV-FX4800K
AUDIO INL
AUDIO INR
Stereo system
Audio cable (Supplied)
To audio out an
Hib
O00
Before audio dubbing
Turn on the TV and set it for VCR reception.
1
Turn on the stereo system, prepare the audio source, and
set it to the playback stand-by mode.
2
Insert a Hi-Fi pre-recorded cassette with its erasure
prevention tab in place into your HV-FX4800K VCR.
3
Press ® PLAY, then press If PAUSE/STILL at the point
you want to start audio dubbing.
4. Press AUDIO DUB to set the VCR to the audio dubbing
stand-by mode.
"A-D: STBY" lights in the display window.
5
Start playing the audio source and press AUDIO DUE again
at the same time to start audio dubbing.
"A-DUB? lights in the display window, and "" appears on the TV
¢ If an audio dubbing is made with a
screen.
monaural prerecorded tape, the
previously recorded sound is erased.
6
Press i STOP at the point you want to stop audio du bbing.
You cannot conduct audio dubbing
with a cassette whose erasure
The Hi-Fi audio and normal audio tracks can be heard at the same isme.
To select the specific sound
Press AUDIO MIX so that "MIX" in the display window goes off.
Press AUDIO MONI to select the sound. See page 15.
29
Advertisement
Table of Contents
