On-Screen Function Display - Aiwa VIDEO Plus HV-FX4800K Operating Instructions Manual

32
On-screen function display
DISPLAY
Important Note
When you record a video signal
output from this VCR onto another
VCR, turn off the on-screen function
display. Otherwise, the mode
indicators displayed on the TV screen
will be recorded on the tape.
Notes)
¢ The indicators will be continuously
displayed while Index Search or
Counter Memory (see page 19) is
operating even if Auto Display has
been selected.
¢ The remaining tape length indicator
may notbe displayed correctly
depending on the type or condition of
the tape. Also, the remaining tape
length indicator may not be displayed
when you begin playback close to the
end of the tape.
Channel number/AV indicator
TV station
Operation mode
indicator(s)
Theatre mode
Remaining tape length (example at
the beginning of the tape)
Tape counter
Audio monitor
Current time
Operation mode indicator
The current tape operation is indicated with the following marks:
> : Play
<< : Rewind
>> : Fast-forward
A : Cassette eject
@ sP : Recording, tape speed
@lLP : Recording pause, tape speed mode
0 2D bP (<<); Fast-forward (or rewind) with the Counter Memory
function
<-> » : Current and memorized successive operation
PPI (i )-1 : Index search (index back search) and the count number
a : Stop
Ss SP : Audio Dubbing, tape speed
Press DISPLAY. Each press changes the on-screen function display as
follows:
<Auto Display> <Counter Display> <Full Display>
| CH1
——_——__———Alll indicators are turned fea!
¢ Auto Display
Only the affected indicator is displayed for 5 seconds, when the video
operation mode changes.
¢ Counter Display
The tape counter is continuously displayed. Other indicators are disp ayed
as in Auto Display.
¢ Full Display
All indicators are displayed continuously.