Table of Contents
Advertisement
Getting Started
Using the RS-232 Interface Option
1-8
The MB100 supports remote control through the RS -232C connector on the rear
panel The unit can be operated from the front panel and over the remote
interface simultaneously. Any unit changes made remotely are displayed on the
front panel . All of the front panel functions can be controlled over the RS-232C
interface, except " POWER . "
The remote commands sent to the MB100 differ from front panel - the current
operating mode is entered directly rather than through sub -menus.
RS-232 Interface Device Settings
The RS-232C interface device settings are programmable through the front
panel. The following RS -232C parameters are programmable , along with the
default setting and other values.
Parameter
Baud, BPS rate
Parity
Data Size
Stop Bits
Echo
XON/XOFF
EOL
Default
9600
Even
7
1
ON
OFF
CR /LF
Values
4800, 2400, 1200 , 600 , 300
None , Odd
8
2
OFF
ON
LF/CR , CR , LF
MB100 Programmer Manual
J J
J J
C
C
C
C
C
C
C
C
C
C
C
Advertisement
Table of Contents
