Rinse aid: Check and re-fill if display shows
Rinse aid helps dry the dishes
without streaks and stains. It is
automatically released during the
hot rinse phase.
Always re-fill just before a wash
programme.
Only use dishwasher rinse aid.
Setting rinse aid level
If there are stains on tableware items after washing the level must be increased If
there is a blue trace after wiping them by hand, it must be decreased.
Adjust the setting from the values 0, 1, 2, 3, 4.
Switch On
Immediately press and
hold the programme key, until
rA is displayed, then release.
Press again, repeatedly to
cycle through the rinse aid
levels (r1 to r5).
Switch off to store the
selected setting.
16
1
2
3
4
For optimum performance we recommend the use of dishwasher
detergent and seperate rinse aid and salt.
www.howdens.com
The factory default
level is:
Blue streaks?
Lower rinse aid
setting.
e.g.
(Default)