Installation; Positioning The Dishwasher; Water Connection - Lamona FLM8600 User Instructions

Freestanding dishwasher
Table of Contents

Advertisement

Compliance with WEEE Directive and Disposal of the Waste Product
This product bears classification symbol for waste electrical and electronic equipment (WEEE). This
product has been manufactured with high quality parts and materials which can be reused and are
suitable for recycling. Do not dispose of the waste product with normal domestic and other wastes at
the end of its service life. Take it to the collection centre for the recycling of electrical and electronic
equipment. Please consult your local authorities to learn about these collection centres.
This product conforms to all relevant safety regulations and directives.
Declaration of Conformity
We declare that our products meet the applicable UK and European Directives, Regulations and the
requirements listed in the Standards referenced.

1. Installation

Please read and follow these installation instructions
carefully to correctly install your dishwasher.
• After unpacking your dishwasher, check for any
possible transportation damage.
• Never install and use a damaged dishwasher. If
your dishwasher is damaged contact your supplier.
• Always have your dishwasher installed by a
suitably qualified person.
• Any repairs or service work on this dishwasher
should only be carried out by a LAMONA Authorised
Service Agent.
• Unauthorised repairs are dangerous and will lead
to the cancellation of your guarantee.
• Make sure the electricity and water connections
are in compliance as stated in the Installation
Instructions.
• Do not install or use the appliance where the
temperature is less than 0°C.

Positioning the dishwasher

• Place the dishwasher in an area where dishes can
easily be loaded and unloaded.
• Place the machine close to a water tap and drain.
Take into consideration that the connections will not
be altered once the machine is in position.
• Do not handle the machine by its door or its control
panel.
• Leave an adequate distance around the machine
to allow ease of movement when accessing.
6
• Ensure the water inlet and outlet hoses are not
squeezed or trapped and that the machine does
not stand on the electrical cable.
• Adjust the 4x feet so that the machine is level
and stable. The machine should be placed on flat
ground otherwise it will be unstable and the door of
the machine will not close properly.

Water connection

We recommend fitting a filter to your water inlet
supply in order to prevent damage to your machine
due to contamination (sand. rust, etc.) from indoor
plumbing. This will also help prevent yellowing and
deposits forming after washing.
Important:
often caused by the water fill and water drain
hoses being kinked or blocked.
Ensure the flow of water to and from the
dishwasher is not restricted.
Note: Faulty components must be replaced by
genuine original LAMONA spare parts. Only when
these parts are fitted can LAMONA guarantee the
safety standards of the machine.
www.howdens.com
Faults with the machine are

Advertisement

Table of Contents
loading

Table of Contents