Setting Water Hardness Level / Adding Salt; Check And Refill Salt - Lamona FLM8600 User Instructions

Setting water hardness level / adding dishwasher salt
The default salt setting is
Switch On
Immediately press and
hold the programme key, until
SL is displayed, then release.
Press again, repeatedly to
cycle through the water
hardness levels (L1 to L6).
Switch off to store the
new setting.
Check and re-fill salt every 30 days or if display shows
2
1
Only use granular dishwasher salt.
Risk of corrosion.
Ensure lid is correctly seated and secured as
saline solution will corrode internal cabinet and
components.
Always run a programme cycle immediately
after filling salt container.
1
2
3
Fill Fill
Exclusive to Howdens
Example shows L1 is chosen
White chalky deposits
during use?
Increase the salt
softener level.
Fill to top Fill to top
e.g.
2
1
15