Before Calling For Service/Problem Solving; Fault Codes - Lamona FLM8600 User Instructions

Freestanding dishwasher
Table of Contents

Advertisement

7 - Before calling for service/problem solving

Before calling the LAMONA Service Line check the
following and trouble shooting guide below.
• Is the machine plugged in and switched on?
• Is the circuit breaker switch on?
• Is the water supply valve turned on?
• Is the dishwasher door closed firmly?

Fault codes

Problem
Reason
The programme
Dishwasher is not plugged in.
does not start.
The dishwasher is not switched on.
Fuse has blown / breaker has tripped.
Water inlet tap is closed.
The dishwasher door is open.
Water inlet hose and machine filters are
clogged.
Insufficient water fill.
Water remains
Water drain hose is clogged or twisted.
inside the
machine.
The programme is not finished yet.
Dishwasher
There may have been a power failure.
stops during
Water inlet failure.
washing.
Shaking and
The spray arm is hitting the dishes in the
banging noises
lower basket.
heard during
operation.
Some food waste
Dishes placed incorrectly (overcrowded),
remains on the
preventing sprayed water from reaching
dishes.
affected areas.
• Are the filters clogged?
• Is the detergent dosage and/or rinse aid sufficient?
• Is there enough salt in the water softener?
• Are the spray arms blocked / turning freely?
Not draining water.
Check drain hose for kinks/blockages.
Internal leak - signs of water.
Turn off at water supply and mains electric.
Call for a Service Engineer.
No water supply.
Check water valve is on and fill hose is not kinked.
Separate the inlet hose from the tap and clean the
hose filter.
PROBLEM SOLVING
Solution
Ensure the plug is securely connected to the socket and that
the socket switch is in the ON position.
Switch your dishwasher on using the On/Off button.
Check / replace your household fuse / reset or replace
consumer unit breaker.
Turn on the water inlet tap.
Close the dishwasher door.
Check the water inlet hose and machine filters and make sure
they are not clogged.
Check mains water pressure. Fill hose kinked.
Check the water inlet hose and machine filters and make sure
they are not clogged.
Wait until the programme is finished.
Check the mains power.
Check the water tap.
Move or remove items blocking the spray arm.
Avoid overloading the baskets. Check to be sure water action
is not blocked by dishes. Check filter system for accumulated
or deposited food or detergent. Load dishwasher correctly.
Exclusive to Howdens
33

Advertisement

Table of Contents
loading

Table of Contents