Carrier TB-24 Installation And Operation Manual page 22

Comfortvu bacnet thermostat

Hide thumbs Also See for TB-24:

Table of Contents

System mode and fan speed

5. Press the [C/F–Prog] button again. The system MODES will flash.

6. Use the [+] and [-] buttons to select the system mode of the first event

7. Press the [C/F–Prog] button again. The FAN SPEEDS will flash.

8. Use the [+] and [-] buttons to select the fan speed of the first event.

Setpoint

1. Press the [C/F – Prog] button again. The setpoint will flash.

Note: If the thermostat is configured to have two setpoints,

first adjusts the setpoint for cooling and then the setpoint for heating.

2. Use the [+] and [-] buttons to adjust the setpoint of the first event.

•

Follow the steps above for the other schedule events of the same daily period (P2 for two events per day, or

P2, P3 and P4 for four events per day).

•

Follow the steps above for all daily periods.

ComfortVu™ BACnet Thermostat Model Standard TB-24 (24 Vac)Carrier Proprietary and Confidential

Installation and Operation Guide

Table of Contents

Tbpl-24-h