Stop time
5. Press the [C/F – Prog] button again. T the word "Stop" will appear on display, and the
HOURS will flash.
6. Use the [+] and [-] buttons to adjust the stop time hours of the first event
7. Press the [C/F–Prog] button again. The MINUTES will flash
8. Use the [+] and [-] buttons to adjust the stop time minutes of the first event
•
Follow the steps above for the other schedule events of the same daily period (P2 for two events per day, or
P2, P3, and P4 for four events per day).
•
Follow the steps above for all daily periods.
Adjusting "US type" daily programs
Start time
1. Press the [C/F–Prog] button. The programmed weekday(s), "Prog 1" indicating the first
program event of the day and the word "Start" will appear on display.
The HOURS will flash.
Note: If this is the first time a program is being set, the symbols "--" will flash.
2. Use the [+] and [-] buttons to adjust the start time hours of the first event.
3. Press the [C/F–Prog] button again. The MINUTES will flash.
4. Use the [+] and [-] buttons to adjust the start time minutes of the first event.
ComfortVu™ BACnet Thermostat Model Standard TB-24 (24 Vac)Carrier Proprietary and Confidential
Installation and Operation Guide
17
CARRIER CORPORATION ©2024
All rights reserved