Table of Contents
Advertisement
Quick Links
PARLÉ™
INSTALLATION AND SETUP GUIDE
INSTALLATION CONSIDERATIONS
• The N 100 is designed to be installed behind a display or close to the in-room display.
• The device can also be securely mounted in various locations using the provided mounting plate,
including desktops, walls, and more. The plate has a built-in cable management retainer cord
organization and security.
• Do not exceed the maximum ambient operating temperature of 32-104° F (0-40° C). Be aware
of conditions in an enclosed rack that may cause the temperature to exceed ambient room
conditions.
Warning: the N 100 power supply MUST NOT be connected to a VBC 2500 or ABC 2500
conference bar. the unit will be damaged.
Biampinfo@biamp.com
N 100™
NETWORK EXPANDER
FOR BIAMP USB DEVICES
www.biamp.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Biamp PARLE N 100
Summary of Contents for Biamp PARLE N 100
- Page 1 INSTALLATION AND SETUP GUIDE N 100™ NETWORK EXPANDER FOR BIAMP USB DEVICES INSTALLATION CONSIDERATIONS • The N 100 is designed to be installed behind a display or close to the in-room display. • The device can also be securely mounted in various locations using the provided mounting plate, including desktops, walls, and more.
-
Page 2: Included In The Box
INCLUDED IN THE BOX IN THE BOX • N 100 • Cable management cover • Mounting plate • Wall screws (4) • Wall anchors (4) • Mounting-plate screws (4) • Cover screw (1) • USB 3.0 3’ (1m) Type A to B (1) •... -
Page 3: Device Layout
DEVICE LAYOUT FRONT PANEL FRONT PANEL INDICATORS Red: Off: Green: The device is The device is The device is booting. not powered powered REAR PANEL REAR PANEL PORTS/TERMINALS/INDICATORS UC / LAPTOP ADDITIONAL 1. USB Input Type-B 4. RJ45 Network Gigabit Ethernet (LAN) 5. -
Page 4: Installation
INSTALLATION REMOVEABLE MOUNTING PLATE The N 100 may be installed in almost any location that works for the room design, requirements, etc. This includes installation on a wall behind a typical conference room display or under a table. Be sure to allow for adequate airflow on the ventilation grilles. For installation on a wall, behind a conference room display, or under a table use the provided mounting plate. -
Page 5: Mount The Device
INSTALLATION MOUNT THE DEVICE 1. The N 100 comes attached to the mounting plate via four mounting screws. If the bracket has been removed, attach it before attempting to mount the device. 2. Locate a flat place to mount the device using the attached mounting plate. 3. - Page 6 INSTALLATION CABLE MANGEMENT 5. Once the device is in place, use the built-in cable management retainer to keep cables organized and protected from accidental damage. Installation & Setup Guide N 100...
- Page 7 INSTALLATION CABLE MANGEMENT 6. Once the device is in the desired location, and the cables are connected and secure within the cable management retainer, attach the protective cover. 7. The cover will snap into place. Secure the cover using the provided cover screw. Installation &...
- Page 8 CONNECTIONS COMPLETE SYSTEM DEPLOYMENT Warning: The Parlé N 100 power supply MUST NOT be connected to a VBC 2500 or ABC 2500 conference bar as the unit will be damaged. See the Parlé N 100 PSU warning label. Network Parlé VBC 2500 Laptop or UC Compute TesiraFORTÉ...
- Page 9 CONTACT US Web: support.biamp.com Email: support@biamp.com Warranty: biamp.com/legal/warranty-information Safety & Compliance: biamp.com/compliance biamp.com/legal/warranty-information Biampinfo@biamp.com www.biamp.com...
Need help?
Do you have a question about the PARLE N 100 and is the answer not in the manual?
Questions and answers