LaCie 2BIG NAS User Manual page 418
Hide thumbs
Also See for 2BIG NAS:
- Quick install manual (14 pages) ,
- User manual (245 pages) ,
- User manual (60 pages)
Table of Contents
Advertisement
LaCie Network Assistant
If you do not see the LaCie 5big NAS Pro in LaCie Network Assistant, confirm that your LaCie 5big NAS Pro is:
Connected to the same network as the workstation you are using. In certain configurations, the LaCie 5big NAS
Pro is connected to two separate networks (see
Tolerance).
Connected to the same network as the workstation you are using via the LAN 1 Ethernet port. LaCie Network
Assistant requires that LAN 1 act as the primary Ethernet port for your LaCie 5big NAS.
If you still do not see your device in LaCie Network Assistant, follow the instructions below:
1.
Launch LaCie Network Assistant.
2.
Select Preferences...
1.
Windows: Right click on the LaCie Network Assistant icon in the system tray.
2.
Mac: Click on the LaCie Network Assistant icon in the menu.
3.
Enable IPConf Support by clicking on Activate.
Select Activate to enable IPConf Support
LaCie 2big NAS | LaCie 5big NAS Pro User Manual
Port Aggregation: Multiple Networks, Bonding, and Fault
418
Advertisement
Table of Contents
Troubleshooting
