Step 4: Install hard drives into the enclosure
Add new hard drives in the order of the numbered slots, from left to right.
Remove the empty disk trays:
1.
Use the included drawer key to unlock the disk tray. Turn the lock until it is vertical.
2.
Place your index finger into the space behind the handle then carefully remove the disk tray.
3.
Remove additional trays if you are adding more than one hard disk. Make certain to remove the disk trays in
the proper slot order.
Fasten the hard drive to the hard disk tray:
Find a suitable work area with adequate space and a flat, even surface. Make certain that all necessary
components are available:
LaCie 5big NAS Pro Hard Disk Tray
Hard drive
Hard disk tray screws. Use only the screws that are provided with your LaCie NAS.
Phillips head screwdriver. Confirm that the head of the screwdriver is the proper size for the disk tray screws.
Secure a hard drive to the hard disk tray:
1.
Place the empty hard drive tray onto the flat work area with the handle on the bottom left.
2.
Many hard disks have a label on one side and the printed circuit board on the opposite side. With its label
LaCie 2big NAS | LaCie 5big NAS Pro User Manual
33