Step 2: Connect the Ethernet cable, power cable, and LaCie key
1.
Connect the Ethernet cable to the Ethernet port on the back of the product and to an available Ethernet port
on your router. Refer to your router's documentation if necessary.
2.
Connect the power supply to a wall outlet and to the product.
3.
Connect the LaCie key to one of the USB ports on the LaCie 5big NAS Pro.
Caution: Only use the AC adapter supplied with your specific LaCie device. Do not use a power supply from
another LaCie device or another manufacturer. Using any other power cable or power supply may cause
damage to the device and void your warranty. Always remove the AC adapter before transporting your LaCie
device. Failure to remove the adapter may result in damage and will void your warranty.
LaCie 2big NAS | LaCie 5big NAS Pro User Manual
31