INSTALLATION STEPS
Step 1: Update the LaCie USB key
The included USB flash drive allows you to boot the LaCie 5big NAS Pro and run the NAS OS Rescue and Install (
LaCie key). However, before running the Rescue and Install, it is highly recommended that you download a more
recent version of the software as it may have been updated since you received your NAS.
The software that you download onto the LaCie key NAS is not the NAS OS. Rather, it is a utility to run the NAS
OS Rescue and Install so that you can install or repair the NAS OS.
To update the LaCie key:
1.
Insert it into a USB port on a computer with a connection to the internet.
2.
Launch an internet browser and enter the following address: http://www.lacie.com/lakeynas
3.
Follow the onscreen directions to update the software on the LaCie key.
4.
Eject the key from your computer.
LaCie 2big NAS | LaCie 5big NAS Pro User Manual
29