LaCie 2BIG NAS User Manual page 355
Hide thumbs
Also See for 2BIG NAS:
- Quick install manual (14 pages) ,
- User manual (245 pages) ,
- User manual (60 pages)
Table of Contents
Advertisement
The iSCSI target will appear in Computer/My Computer as a local disk.
ISNS: INTERNET STORAGE NAME SERVICE
A LaCie NAS iSCSI target can be managed by a server that supports the Internet Storage Name Service (iSNS).
Certain iterations of Windows Server include the iSNS feature. A server that supports iSNS can manage multiple
iSCSI targets on the network, thus saving time for each iSCSI initiator. For example, rather than searching the
network for an iSCSI target, the initiator can look for a connection in a single location, the iSNS server. The iSNS
server keeps tabs on all the iSCSI targets on the network, thus allowing the initiator to connect to one that is
available.
Configure iSNS on your network server then review the instructions below to add your LaCie NAS iSCSI target.
iSNS: LaCie NAS Dashboard (iSCSI target)
Enable iSNS server and enter its IP address:
1.
Go to Dashboard > General Settings > File sharing.
2.
Select the configuration icon (pencil) for iSCSI and then Advanced parameters.
3.
Choose the checkbox and enter the iSNS server's IP address.
LaCie 2big NAS | LaCie 5big NAS Pro User Manual
355
Advertisement
Table of Contents
Troubleshooting
