LaCie 2BIG NAS User Manual page 34
Hide thumbs
Also See for 2BIG NAS:
- Quick install manual (14 pages) ,
- User manual (245 pages) ,
- User manual (60 pages)
Table of Contents
Advertisement
side facing up, gently place the hard disk within the hard drive tray. Keep the side with the printed circuit
board on the work space and the SATA connector facing to the right. The four tray screw slots should align
with the hard disk's four screw holes.
3.
Use the Phillips head screwdriver to fasten all four screws into the four tray slots. Do not overly tighten the
screws. Doing so can affect the integrity of the screw holes on the hard drive as well as the threads on the
screws.
4.
Repeat the process if you are adding more than one hard disk.
5.
Carefully insert the full hard drive tray into the empty disk slot 1 (far left). You will feel resistance when the
hard drive tray is most of the way in the bay. Gently push the hard drive tray handle firmly until you feel it
snap into place.
6.
Once the disk tray handle is flush with the back of the enclosure, you can lock it.
LaCie 2big NAS | LaCie 5big NAS Pro User Manual
34
Advertisement
Table of Contents
Troubleshooting
