LaCie 2BIG NAS User Manual page 377

For multiple NAS listings, scroll down to enter the destination NAS's public IP address
8. The Backup & Restore Wizard will search for the offsite destination NAS. If the destination NAS cannot be
found, please make certain that:
It is powered on and out of sleep mode (see
NetBackup server has been enabled (see
The proper IP address has been entered. You must use the public IP address rather than the IP address
generated by the destination NAS's DHCP server.
9. The Advanced parameters window lists four options for your backup job. See the explanations below. It is
not mandatory to select one or more of the parameters to continue with the backup:
Secure data transfers uses encryption during the data transfer. The data is not encrypted once it is stored
on the destination NAS. This option is ideal for offsite backups.
Compressing data optimizes data transmission rates. Data is compressed during the transfer only. While
this option is good for low bandwidth networks, it can affect the NAS's performance.
Sending modified parts of files is best used with backups that include files larger than 50MB. For example, if
you edit a document that has already been backed up, only the edits will be copied during the next backup.
This option can affect the NAS's performance.
Maintain files on the destination folder keeps files on the destination NAS even if they are deleted from the
LaCie 2big NAS | LaCie 5big NAS Pro User Manual
Eco Management).
Remote Backups: Enable NetBackup Server).
377