LaCie 2BIG NAS User Manual page 373

REMOTE BACKUP: OFFSITE
Review the list of prerequisites for an offsite backup before following the instructions:
The destination NAS must be connected to an offsite network and powered on.
You must have the public IP address for the Destination NAS. You can find the public IP address by visiting
http://www.whatismyip.com/
public IP address, use a computer connected to the same router as the destination NAS. For further
information, review the user manual for the offsite network router or contact your internet service provider. An
explanation of IP addressing is available at http://en.wikipedia.org/wiki/IP_address.
If you are using a LaCie NAS for the offsite backup, enable the NetBackup server (see
NetBackup Server).
Note on offsite backups: If you have disabled port forwarding or you are experiencing difficulties
connecting to the destination NAS, use the router's management software at the offsite location to open port
numbers 22 and 873. Review the user manual for the offsite network router or contact your internet service
provider.
LaCie 2big NAS | LaCie 5big NAS Pro User Manual
or by accessing your router's management software. When searching for the
Remote Backups: Enable
373