Advertisement
1) Take apart the installed infra-red inductive control box with cross
screwdriver;
2) According to user's requests,adjust the code switch on the main
board to the relevant position
(The code's instruction refers to the following)
6. The code's intruction
Set the code switch S1 in the Infra-red inductive control box to select
the delay OFF time while the air-conditioner did not sense the human
activities, the specific are displayed as follow:
ON
ON
S1
ON
Fig.7
Delay 1 hour to OFF the unit
1 2
Delay 0.5 hour to OFF the unit
1 2
(Reserved switch code)
1 2
Code switch position
Fig.8
Fig.9
11
(default)
Advertisement
