Table of Contents
Advertisement
QUICK REFERENCE GUIDE
SET-UP
•
Plug AC adaptor into a standard
electrical outlet and connect to
Base Unit.
•
Set Dial Mode switch to PULSE or
TONE . The unit is factory set
to TONE .
•
Let handset battery pack charge
for 16 hours before first use.
• Connect telephone line cord to Base
Unit and telephone jack.
MAKING CALLS
•
Press the PHONE key. When you
hear a dial tone, dial the number.
ANSWERING CALLS
•
To answer a call press any key
other than OFF , MUTE , or the
Volume Keys. The handset will
auto-answer when lifted off the
base cradle.
1901MANUAL
HANGING UP
Press OFF , or place the handset in
the base cradle to hang up a call.
TO PLACE A CALL ON HOLD
•
Press HOLD to place an active call
on hold.
•
The PHONE LED will flash to
indicate call is on hold.
•
Press HOLD again to return to the
call.
TO MUTE A CALL
•
Press MUTE to disable the handset
microphone.
•
The MUTE/LO BATT LED will stay
on continuously.
•
Press MUTE again to return to two
way conversation
TO PAGE THE HANDSET
•
To page from the Base Unit, press
PAGE .
•
To cancel the page, either press
PAGE again on the Base Unit or
press OFF on the handset.
18
18
1/28/99, 3:29 PM
Advertisement
Table of Contents
