Special Notice And California Proposition 65 Warning - Everlast Typhoon 500 Operator's Manual

Product Specifications and features are subject to change without notice. While
every attempt has been made to provide the most accurate and current infor-
mation possible at the time of publication, this manual is intended to be a general
guide and not intended to be exhaustive in its content regarding safety, welding,
or the operation/maintenance of this unit. Due to multiple variables that exist in
the welding field and the changing nature of it and of the Everlast product line it-
self, Everlast Power Equipment INC. does not guarantee the accuracy, complete-
ness, authority or authenticity of the information contained within this manual or
of any information offered during the course of conversation or business by any
Everlast employee or subsidiary. The owner of this product assumes all liability
for its use and maintenance. Everlast Power Equipment INC. does not warrant
this product or this document for fitness for any particular purpose, for perfor-
mance/accuracy or for suitability of application. Furthermore, Everlast Power
Equipment INC. does not accept liability for injury or damages, consequential or
incidental, resulting from the use of this product or resulting from the content
found in this document or accept claims by a third party of such liability.
This product, when used for welding or cutting, produces fumes or gases which contain chemicals known to the State of California
to cause birth defects and in some cases, cancer. (California Health & Safety Code § 25249.5 et seq.)
The Typhoon Series of welders are designed for use by professional welders in commercial settings. Commercial
settings are equipped with industrial wiring and power supply. This welder requires a dedicated circuit and special
welder outlets that are not typically found in home garages. The higher Amperage outlets and breakers required by
this welder may not allow connection to a standard home panel box with out significant modification to meet nation-
al electric codes and the input requirements of the welder. (See specifications page of inrush and rated current.)
Additionally, use in home settings may cause interference with electronics. Besides a required dedicated circuit,
this welder may also require additional grounding of all metal items and the welder by a commercial electrician to
prevent undesirable operation if interference is observed.
California Proposition 65 Warning:
Warning: Cancer and/or Reproductive Harm
www.P65warnings.ca.gov
NOTICE:
WARNING!
NOTICE:
3