Table of Contents
Advertisement
Automat‐
ic light
Mode H6
On
1)
The hob detects the boiling process and activates
fan speed in accordance with automatic mode.
2)
The hob detects the frying process and activates fan
speed in accordance with automatic mode.
3)
This mode activates the fan and the light and does
not rely on the temperature.
Changing the automatic mode
1. Deactivate the appliance.
2. Press
until you hear a beep and keep
it pressed until you hear the second beep.
3. Press
for 3 seconds until
comes on.
4. Press
until H and a digit (0 - 6) comes
on. H5 is the default setting.
5. Press
of the Timer to select the
desired mode (H0 - H6). The chosen
mode activates automatically after 10
seconds.
To operate the hood directly on the hood
panel deactivate the automatic mode of
the function.
When you finish cooking and deactivate
the hob, the hood fan may still operate
for a certain period of time. After that time
the system deactivates the fan
automatically and prevents you from
accidental activation of the fan for the
next 30 seconds.
Operating the fan speed manually
You can also operate the function manually.
To do that touch
when the hob is active.
This deactivates automatic operation of the
function and allows you to change the fan
speed manually. When you press
16
ENGLISH
Boiling 1)
Frying 2)
Fan speed
Fan speed
2
3
or
you
raise the fan speed by one. When you reach
an intensive level and press
set fan speed to 0 which deactivates the hood
fan. To start the fan again with fan speed 1
touch
.
To activate automatic operation of the
function, deactivate the hob and activate
it again.
Activating the light
You can set the hob to activate the light
automatically whenever you activate the hob.
To do so set the automatic mode to H1 – H6.
The light on the hood deactivates 2
minutes after deactivating the hob.
6.14 Power management function
• All cooking zones are connected to one
phase. See the illustration.
• The phase has a maximum electricity
load.
• The function divides the power between
cooking zones.
• The function activates when the total
electricity load of the cooking zones is
exceeded.
• The function reduces the power of the
other cooking zones.
• The heat setting display of the reduced
zones changes between two levels.
again you will
Advertisement
Table of Contents
