Table of Contents
Advertisement
24
QUANTITY
QUANTITY
QUANTITY
QUANTITY
- the required quantity of water by pressing
24);
- the required water temperature by pressing one of the
proposed teas; each tea (white, green, oolong or black)
corresponds to a specific water temperature (fig. 25);
5. Once the beverage is selected, the corresponding image
appears on the display (B), together with a progress bar
which fills gradually as preparation proceeds;
6. The machine delivers the chosen quantity of hot water,
then delivery stops automatically. To stop delivery manu-
ally, press "
Please note!
•
If "Energy Saving" mode is active, you may have to wait a
few seconds before the hot water is delivered.
•
The quantity of water in the cup can be customised (see
sections "16. Customising the beverages " and "17. Memo-
rising your personal profile").
•
Delivery can be stopped at any moment by pressing "
";
•
As soon as delivery has ended, to increase the quantity of
water in the cup, just press "
quantity is reached, press "
12. DELIVERING HOT WATER
Important! Danger of burns.
Do not leave the appliance unattended while hot water is being
delivered.
1. Make sure the hot water/steam spout (C6) is attached cor-
rectly to the hot water/steam connection nozzle (A9);
2. Place a container under the spout (as close as possible to
avoid splashes);
3. Select "
HOT WATER" from the homepage. The corre-
sponding image appears on the display (B), together with a
progress bar which fills gradually as preparation proceeds;
".
EXTRA". When the required
".
4. The machine delivers hot water, then delivery stops auto-
matically. To interrupt hot water delivery manually, press
"
Please note!
•
If "Energy Saving" mode is active, you may have to wait a
few seconds before the hot water is delivered.
•
Preparation of hot water can be customised (see sections
"16. Customising the beverages" and "17. Memorising your
personal profile").
13. STEAM DELIVERY
25
Important! Danger of burns.
(fig.
Do not leave the appliance unattended while steam is being
delivered.
1. Make sure the hot water/steam spout (C6) is attached cor-
rectly to the hot water/steam connection nozzle (A9);
2. Fill a container with the liquid to be heated or frothed and
immerse the hot water/steam spout in the liquid;
3. Select "
sponding image appears on the display (B), together with
a progress bar which fills gradually as preparation proceeds
and after a few seconds, steam to heat the liquid is deliv-
ered from the hot water/steam spout;
4. When the required temperature or level of froth is reached,
interrupt steam delivery by pressing "
Important!
Always stop steam delivery before extracting the container con-
taining the liquid to avoid burns from splashes.
Please note!
If "Energy saving" is active, you may have to wait a few seconds
before steam is delivered.
13.1 Tips for using steam to froth milk
•
When choosing the size of the container, bear in mind that
the liquid doubles or triples in volume.
•
For a richer denser froth, use skimmed or partially skimmed
milk at refrigerator temperature (about 5°C).
•
For a creamier froth, rotate the container with slow move-
ments in an upward direction.
•
To avoid milk with poor froth or large bubbles, always clean
the spout (C6) as described in the following section.
13.2 Clean the hot water/steam spout after use
Always clean the hot water/steam spout (C6) after use to avoid
the build-up of milk residues and prevent it from clogging.
17
".
STEAM" from the homepage. The corre-
";
Advertisement
Table of Contents
Troubleshooting
