Selecting The Coffee Quantity; Making Coffee Using Pre-Ground Coffee; Adjusting The Coffee Mill; Tips For A Hotter Coffee - DeLonghi DINAMICA PLUS ECAM370.95.T Instructions For Use Manual

After delivering the beverage, the aroma setting is reset to the
value.

7.3 Selecting the coffee quantity

Press the button (C1):
After delivering the beverage, the quantity setting is reset to the
value

7.4 Making coffee using pre-ground coffee

Important!
• Never add pre-ground coffee when the machine is off or it
could spread through the inside of the machine and dirty
it. This could damage the machine.
• Never use more than 1 level measure (D2) as it could soil
the inside of the coffee machine or block the funnel (A4).
• When using pre-ground coffee, only one cup can be made
at a time.
1. Press the button (C6) until "
displayed.
2. Open the pre-ground coffee funnel lid (A2).
3. Make sure the funnel(A4) is not blocked, then add one level
measure of pre-ground coffee (fig. 12).
4. Place a cup under the coffee spouts (A9).
5. Then select your required coffee:
• ESPRESSO
• LONG
• COFFEE
LIGHT
MEDIUM
STRONG
X-STRONG
(see "7.4 Making coffee
using pre-ground coffee")
Custom (if programmed) /
Standard
SMALL SIZE
MEDIUM SIZE
LARGE SIZE
EXTRA-LARGE SIZE
" (ground) is
6. Preparation begins. An image of the selected beverage
appears on the display, together with a progress bar which
gradually fills as preparation proceeds.
Once the coffee has been delivered, the machine will be ready
for further use.
Important! Making LONG coffee:
Halfway through preparation, the message "ADD GROUND COF-
FEE" "MAX. ONE MEASURE" is displayed. Add one level measure
of pre-ground coffee and press

7.5 Adjusting the coffee mill

The coffee mill is set by default to prepare coffee correctly and
should not require regulating initially.
However, if after making the first few coffees you find that the
coffee is either too weak and not creamy enough or delivery is
too slow (a drop at a time), this can be corrected by adjusting
the grinding adjustment dial (A5) (fig. 13).
Please note!
The grinding adjustment dial must only be turned when the
coffee mill is in operation during the initial phase of coffee
preparation.
If the coffee is delivered too slowly or not
at all, turn one click clockwise towards 7.
For fuller bodied creamier coffee, turn
one click anticlockwise towards 1 (do
not turn more than one click at a time
otherwise the coffee could be delivered
a drop at a time).
These adjustments will only be evident after at least 2 cups of
coffee have been delivered. If this adjustment does not produce
the desired result, turn the dial another click.

7.6 Tips for a hotter coffee

For hotter coffee, proceed as follows:
• perform a rinse cycle by selecting the "Rinsing" function in
the settings menu (section "6.3 Rinse
• warm the cups with hot water using the hot water function
(see section"10. Delivering hot water");
• increase the coffee temperature in the settings menu
" "(C3) (see section "6.9 Coffee temperature ").
8. MAKING CAPPUCCINOS AND MILK-
BASED COFFEES
Please note!
To avoid milk with poor froth or large bubbles, always clean the
milk container lid (E2) and hot water connection nozzle (A8)
as described in sections "8.4 Cleaning the milk container after
use", "13.10 Cleaning the milk container" and "13.11 Cleaning
the hot water nozzle".
35
.
");