Positioning - Smeg C9MAMBSSA2 Manual

The nozzles not provided are available at Authorised Service Centres.

Positioning

See General safety instructions.
Depending on the type of installation, this
appliance belongs to classes:
Class 1
Class 2 - subclass 1
The appliance can be placed against walls that
are higher than the work surface, at a minimum
distance of X mm from the side of the appliance.
Any wall units installed above the appliance's
worktop must be positioned at least Y mm from
it.
X
Y
If a hood is installed above the
appliance, refer to the hood instructions
manual to make sure the correct
clearance is left.
Appliance overall dimensions
B B
C C
A
B
1
C
91477A424/A
Free-standing
Built-in
300 mm
750 mm
L L
H H
I I
C C
A A
D D
900 mm
600 mm
min. 300 mm
D
H
I
2
L
1
Minimum distance from side walls or other
flammable material.
2
Minimum cabinet width (=A)
Appliance dimensions
Position of gas connection
Position of electrical connection
Levelling the appliance
See General safety instructions.
The appliance must be level on the floor in order
to ensure greater stability.
After making the gas and electrical connections,
screw on the four legs supplied with the
appliance (1). Screw or unscrew the feet at the
bottom until the appliance is stable and level on
879 ÷ 919 mm
750 mm
450 mm
900 mm
INSTALLATION - 27