Table of Contents
Advertisement
4. Screw the assembled extension C to the gas
connector D of the appliance, placing the
provided seal 2 between them.
Burner and nozzle characteristics tables
NG 1.0 kPA
Nominal gas consumption (MJ/h)
Nozzle diameter (1/100 mm)
Reduced flow rate (MJ/h)
ULPG 2.75 kPA
Nominal gas consumption (MJ/h)
Nozzle diameter (1/100 mm)
Reduced flow rate (MJ/h)
The nozzles not provided are available at Authorised Service Centres.
Positioning
See genral safety instructions.
A: 600 mm (height), measured from the top of
the highest burner and 750 mm from an exhaust
fan. (a mechanical device other than a range
hood for moving air from one interior space to
another, or to outside of the space).
B: 200 mm (vertical combustible surface),
measured from the edge of the nearest burner.
C: 10 mm or more (horizontal combustible
30 - INSTALLATION
5. Apply insulating material to the thread of the
assembled extension C.
AUX
SR
3.9
7.5
90
120
1.44
1.8
AUX
SR
3.9
6.3
54
68
1.44
1.8
surface) below the hob.
Refer to AS/NZS 5601 (Protection of
combustible surfaces) if it is not possible
to meet the minimum distances
indicated above.
The supply connection point must be
accessible with the appliance installed.
R
UR2
12
15
155
175
2.88
4.32
R
UR2
10.8
15
88
105
2.88
4.32
91477A747/B
Advertisement
Table of Contents
