WAGNER GM5000 Operating Manual page 96

EDITION 03/2012
OPERATING MANUAL
Insertion position compl. package
3
2
SW5/ 0.4 - 0.5 Nm
B_03202
Ensure the correct
4
insertion position!
Ensure the correct
insertion position!
PART NUMBER DOC 2319150
SW5
4
2
1
Set measure X with withdrawal nut and
then fasten it with the threaded pin
(SW2).
X = 123 ±0.1
Push together the valve rod unit and the
compl. package.
SW6
0.4 -
Screw in together the valve rod unit and the
0.5 Nm
compl. package.
Remove the valve rod unit.
2
Tighten the compl. package.
Carefully insert the valve rod unit and mount the
complete clamping screw (1) with assembly tool
(5).
0.5 Nm
5
Tighten slightly AC valve
tip by hand using an
assembly tool
(Part No. 2309368).
1.2 Nm
Assembly tool
(Part No. 2325263).
GM 5000EAC.
X
5
Note:
SW9
Use assembly tool, socket or
ring spanner (no wrench).
SW2
1Nm
B_03203
43