WAGNER GM5000 Operating Manual page 90

EDITION 03/2012
OPERATING MANUAL
Exploding gas/ air mixture!
Danger to life from flying parts and burns
SIHI_0008_GB
1. Switch off control unit.
2. Ensure that the material pressure is relieved and shut off the air supply to the gun.
3. Connect up the supply of cleaning solvent.
With round jet nozzle fi tted:
4. By means of nozzle spanner, loosen nozzle insert by a half turn.
5. Actuate the trigger guard. Flush the gun through thoroughly.
6. Relieve the material pressure on the spray gun and the devise!
7. Tighten nozzle insert.
8. Clean the spray gun body with a cleaning agent recommended by the manufacturer
and dry with a cloth or blow gun.
With fl at jet nozzle fi tted:
4. Remove AirCoat nozzle and clean separately (see paragraph 5.4.7).
5. Actuate the trigger guard. Flush the gun through thoroughly.
6. Relieve the material pressure on the spray gun and the devise!
7. Clean gun body with a cleaning agent recommended by the manufacturer and dry
with a cloth or blow gun.
Cleaning agent in the air duct!
Functional faults caused by swollen seals
Discharge current to ground -> no high voltage
Always point the spray gun down when cleaning.
Ensure that neither paint nor cleaning agent enters the air duct.
When taking a break from work or when stored for a longer period, the spray gun
has to be positioned correctly with the attachment pointing downwards.
SIHI_0145_GB
PART NUMBER DOC 2319150
Never spray into a closed container.
Earth the container.
CAUTION
B_03453
DANGER
GM 5000EAC.
37