Table of Contents
Advertisement
SETTING UP THE SERVER
STEP 1:
Connect external devices, power and network.
1.
Connect a monitor, USB keyboard, USB mouse and network cable to one of the Ethernet ports (B9 on the diagram).
Configure the camera's network first, then configure the server's local network.
NOTE
See page 2 for detailed back panel breakdown for each model.
2.
Connect the server to an appropriate power source. A UPS system is recommended. 750VA or higher is recommended (per
PSU).
3.
Connecting the power cable to a live power source may turn on the
server automatically. If the server does not turn on automatically, press
the power button on the front of the server (F1 on the diagram).
STEP 2:
Configure date and time
Linux®
1. Open Settings.
2. Click Details.
3. Click Date &Time.
4. Turn OFF Automatic Date & Time and Automatic Time Zone
Quick Start Guide
3
Advertisement
Table of Contents
