Setting Up The Server - Digital Watchdog Blackjack Tower DW-BJST51T Series Quick Start Manual

SETTING UP THE E-RACK
STEP 1: 2. Connect the server to an appropriate power source. Recommend to use UPS system
1. Connect a monitor, USB keyboard, USB mouse and network cable to one of the ethernet ports (B8 on the diagram) Configure the cam *recommend to use 3000VA or higher.

SETTING UP THE SERVER

then will configure local network later.
3. Turn on the server if the server does not turn on automatically.
2. Connect the server to an appropriate power source. Recommend to use UPS system
2. Connect the server to an appropriate power source. Recommend to use UPS system
(Press the Power Button on the front of the P-RACK. F2 on the diagram).
*recommend to use 3000VA or higher.
STEP 1: Connect external devices, power and network.
*recommend to use 3000VA or higher.
* Connecting the power cable to the live power source may turn on the server automatically
3. Turn on the server if the server does not turn on automatically.
3. Turn on the server if the server does not turn on automatically.
(Press the Power Button on the front of the P-RACK. F2 on the diagram).
(Press the Power Button on the front of the P-RACK. F2 on the diagram).
* Connecting the power cable to the live power source may turn on the server automatically
1. Connect a monitor, USB keyboard, USB * Connecting the power cable to the live power source may turn on the server automatically
mouse and network cable to one of the
Ethernet ports (B11 on the diagram).
Configure the camera's network first, then
SETTING UP THE E-RACK
configure the server's local network.
STEP 1: Connect Peripherals, power and network
2. Connect the server to an appropriate power
1. Connect a monitor, USB keyboard, USB mouse and network cable to one of the ethernet ports (B8 on the diagram) Configure the camera network first
then will configure local network later.
source. It is recommended to use a UPS system.
2. Connect the server to an appropriate power source. Recommend to use UPS system
* 750VA or higher is recommended.
*recommend to use 3000VA or higher.
3. Turn on the server if the server does not turn on automatically.
3. Power up the server if the server does not
(Press the Power Button on the front of the P-RACK. F2 on the diagram).
turn on automatically by pressing the power
* Connecting the power cable to the live power source may turn on the server automatically
button on the front of the server. (F1 on the
diagram).
* Connecting the power cable to the
live power source may turn on the server
automatically.
* The power on/off switch must have the '-'
pressed down.
STEP 2:
Windows
STEP 2: Configure date and time
Windows®
STEP 2: Configure Date and Time
Windows
1. Double-click on the date and time icon on the desktop.
1. Double click Date and Time icon on the Desktop.
2. Change time zone if it is not correct
2. Change Time zone if not correct
1. Double click Date and Time icon on the Desktop.
2. Change Time zone if not correct
Press OK after selecting the correct Time zone.
Press OK after selecting the correct time zone.
Click Change date and time... to update the date and time if they are not correct.
* Verify the Time zone before updating the date and time. Time may show 2 or 3 hours off due to incorrect Time zone.
Click "Change date and time..." to update the date and time if they are not correct.
* Verify the time zone before updating the date and time. Time may show 2 or 3 hours off due to an Press OK after selecting the correct Time zone.
incorrect time zone.
Click Change date and time... to update the date and time if they are not correct.
* Verify the Time zone before updating the date and time. Time may show 2 or 3 hours off due to incorrect Time zone.
SETTING UP THE E-RACK
STEP 1: Connect Peripherals, power and network
SETTING UP THE E-RACK
1. Connect a monitor, USB keyboard, USB mouse and network cable to one of the ethernet ports (B8 on the diagram) Configure
then will configure local network later.
STEP 1: Connect Peripherals, power and network
Connect Peripherals, power and network
1. Connect a monitor, USB keyboard, USB mouse and network cable to one of the ethernet ports (B8 on the diagram) Configure
then will configure local network later.
STEP 2: Configure Date and Time
Windows
STEP 2: Configure Date and Time
Configure Date and Time
Windows
1. Double click Date and Time icon on the Desktop.
2. Change Time zone if not correct
1. Double click Date and Time icon on the Desktop.
2. Change Time zone if not correct
Press OK after selecting the correct Time zone.
Click Change date and time... to update the date and time if they are not correct.
Press OK after selecting the correct Time zone.
* Verify the Time zone before updating the date and time. Time may show 2 or 3 hours off due to incorrect Time zone.
Click Change date and time... to update the date and time if they are not correct.
* Verify the Time zone before updating the date and time. Time may show 2 or 3 hours off due to incorrect Time zone.
(default is UTC-08:00 Pacific Time)
Quick Start Guide
(default is UTC-08:00 Pacific Time)
(default is UTC-08:00 Pacific Time).
(default is UTC-08:00 Pacific Time)
(default is UTC-08:00 Pacific Time)
3