Table of Contents
Advertisement
3. Turn on the server if the server does not turn on automatically.
(Press the Power Button on the front of the P-RACK. F2 on the diagram).
* Connecting the power cable to the live power source may turn on the server automatically
SETTING UP THE E-RACK
STEP 1:
1. Connect a monitor, USB keyboard, USB mouse and network cable to one of the ethernet ports (B8 on the diagram) Configure the came
then will configure local network later.
2. Connect the server to an appropriate power source. Recommend to use UPS system
SETTING UP THE SERVER
*recommend to use 3000VA or higher.
3. Turn on the server if the server does not turn on automatically.
STEP 1:
Connect external devices, power and network.
(Press the Power Button on the front of the P-RACK. F2 on the diagram).
* Connecting the power cable to the live power source may turn on the server automatically
1. Connect a monitor, USB keyboard, USB mouse
and network cable to one of the Ethernet ports (B9
on the diagram). Configure the camera's network
first, then configure the server's local network.
2. Connect the server to an appropriate power
source. It is recommended to use a UPS system.
* 3000VA or higher is recommended.
3. Power up the server if the server does not turn
STEP 2:
on automatically by pressing the power button on
Windows
the front of the server. (F1 on the diagram).
*
Connecting
live power source may turn on the server
automatically.
1. Double click Date and Time icon on the Desktop.
2. Change Time zone if not correct
STEP 2:
Windows
STEP 2:
Configure date and time
Windows®
1. Double-click on the date and time icon on the desktop.
1. Double click Date and Time icon on the Desktop.
2. Change Time zone if not correct
2. Change time zone if it is not correct
Press OK after selecting the correct Time zone.
3. Press OK after selecting the correct time zone.
4. Click "Change date and time..." to update the date and time if they are not correct.
Click Change date and time... to update the date and time if they are not correct.
* Verify the Time zone before updating the date and time. Time may show 2 or 3 hours off due to incorrect Time zone.
•
Verify the time zone before updating the date and time. Time may show 2 or 3 hours off due to an incorrect time zone.
Press OK after selecting the correct Time zone.
Click Change date and time... to update the date and time if they are not correct.
* Verify the Time zone before updating the date and time. Time may show 2 or 3 hours off due to incorrect Time zone.
5. Press OK after adjusting to the correct date and/or time. Press OK to close the date and time when done.
Connect Peripherals, power and network
SETTING UP THE E-RACK
STEP 1:
1. Connect a monitor, USB keyboard, USB mouse and network cable to one of the ethernet ports (B8 on the diagram) Configure the camera network first
then will configure local network later.
Configure Date and Time
2. Connect the server to an appropriate power source. Recommend to use UPS system
*recommend to use 3000VA or higher.
3. Turn on the server if the server does not turn on automatically.
(Press the Power Button on the front of the P-RACK. F2 on the diagram).
* Connecting the power cable to the live power source may turn on the server automatically
the
power
cable
Configure Date and Time
STEP 2:
Windows
1. Double click Date and Time icon on the Desktop.
2. Change Time zone if not correct
Press OK after selecting the correct Time zone.
Click Change date and time... to update the date and time if they are not correct.
* Verify the Time zone before updating the date and time. Time may show 2 or 3 hours off due to incorrect Time zone.
Connect Peripherals, power and network
to
the
Configure Date and Time
Press OK after adjusting to the correct date and/or time.
4. Press OK to close Date and Time when done.
Linux
1. Update Date and Time by clicking on the time on the upper right-hand corner then click "Time & Date settings..."
Quick Start Guide
(default is UTC-08:00 Pacific Time)
(default is UTC-08:00 Pacific Time)
(default is UTC-08:00 Pacific Time)
(default is UTC-08:00 Pacific Time).
3
Advertisement
Table of Contents
