STEP 3:
To check for updates
1.
Click on the menu
2. Go to the updates tab. If the system requires updating, click on the update system button.
*
If you are on the latest version, it will say "You have the latest version
installed" and the Update System button will be disabled.
3. Click OK when the update is completed.
STEP 4:
Enter and activate licenses
1.
Go to the system administration window and click on the license tab.
2. Enter the license key and click "Activate License". An Internet connection
is required.
*
Click on "Activate Trial License" if you have not purchased a valid license
key.
3. Click OK to when the license key is activated.
STEP 5:
Configure recording
1.
Right-click on a camera in the resource tree to setup recording. Click on
camera settings from the context menu.
2. Go to the recordings tab.
3. Click
4. Configure the camera's schedule settings for quality, FPS and recording type.
5. Click and drag the mouse over the recording schedule to apply the settings to multiple days and times.
6
then click "System Administration".
to turn on recording.