STEP 2:
Configure date and time (cont.)
5. Click Date & Time and set correct date and time
6. Click Time Zone and set to correct Time zone. (type one of the largest cities in the time zone)
7. Close Settings.
STEP 3:
Configure network
Please have the following information ready before starting the network configuration.
IP address
Subnet mask / Netmask
Default gateway / Gateway
DNS servers
* The camera network and local network cannot be on the same network.
NOTE
The Blackjack® server's network settings are set to DHCP as default.
NOTE
If you are not sure what information to enter, contact your Network Administrator or Internet
Service Provider for the information.
Linux®
1. Open Settings > Network
2. Click Setting of the Ethernet that is Connected
3. Change to Manual then enter Address, Netmask , Gateway.
* Do not enter Gateway information if there is no Gateway in this network.
4. Click Apply to save.
4
Camera network
Not applicable
Not applicable
Local network (LAN)