Configuration of the IP Address
3. At the "#" prompt, enter the following command and press <Enter> as
shown in Figure 4-5.
The previous command would apply the following settings for the Industrial
Managed PoE+ Switch.
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
4. Repeat step 1 to check if the IP address has changed.
Store the current switch configuration
5. At the "#" prompt, enter the following command and press <Enter>.
# copy running-config startup-config
Figure 4-6: Saving Current Configuration Command Screen
Figure 4-5: Configuring IP Address Screen
11