Dalsa Piranha4 User Manual page 97

Full Name Set Binning Vertical
Mnemonic SBV
Argument(s)
Description Set vertical binning
•
Notes
•
Full Name Direction
Mnemonic SCD
Argument(s) Direction
Description Set sensor scan direction
Notes
Full Name Exposure Mode
Mnemonic SEM
Argument(s) Mode
Description Set exposure time mode
•
Notes
•
•
•
•
Full Name Set Exposure Selector
Mnemonic SES
Argument(s) Mode
Description Set exposure selector- when in multi exposure mode (see SME command) the exposure
time for the top and bottom lines can be set independently
•
Notes
Must be in Single line mode (stg 1)
Must be in Line scan mode (dst 0)
In internal mode the exposure time is controlled by the SET command
In external mode the sensor is exposed while CC1 signal is high
External mode is only available when the trigger mode is also external (STM 1)
SEM 1 overrides internally generated independent exposure times
When CC1 signal falls line is read
When not in multiple exposure mode "All" is only selection
1. Single pixel
2. Binning of 2 pixels
0. Forward
1. Reverse (not available in single line mode)
2. External – controlled by CC3 signal (not
available in single line mode)
0. Internal ("Timed")
1. External ("PulseWidth")
2. All
3. Bottom
4. Top