Dalsa Piranha4 User Manual page 78

Transport Layer Feature Descriptions
The following table describes these parameters along with their view attribute and minimum camera
firmware version required. Additionally the firmware column will indicate which parameter is a
member of the DALSA Features Naming Convention (DFNC), verses the GenICam Standard Features
Naming Convention (SFNC not shown).
Display Name
Restart Camera
XML Major
Version
XML Minor
Version
Last GenCP Status
Refresh GenCP
Status
Camera Link
Configuration
Camera Link
Configuration
Tap Geometry
Feature
DeviceReset
DeviceManifestXMLMajorVersion
DeviceManifestXMLMinorVersion
genCPStatus
refreshGenCPStatus
ClConfiguration
Base
Medium
Full
Deca
clDeviceClockFrequency
CL85MHz
CL42.5MHz
DeviceTapGeometry
Description
Used to restart the camera, warm
reset
Together with
DeviceManifestXMLMinorVersion
specifies the GenICam™ feature
description XML
file version (RO)
Together with
DeviceManifestXMLMajorVersion
specifies the GenICam™ feature
description XML
file version (RO)
If a feature read or write fails then
Sapera only
returns that it fails – read this
feature to get the
actual reason for the failure
Returns the last error
Reading this feature clears it
Press to return the current status of
the GenCP
Camera Link Output configuration
Set the camera link clock rate
(RO)
Device
Version
& View
1.00
Beginner
DFNC
1.00
Beginner
DFNC
1.00
Beginner
DFNC
1.00
Beginner
DFNC
1.00
Beginner
1.00
Beginner
1.00
Beginner
1.00
Beginner