Dalsa Piranha4 User Manual page 55

Display Name
UserSet4 UserSet4
UserSet5 UserSet5
UserSet6 UserSet6
UserSet7 UserSet7
UserSet8 UserSet8
Power-on User Set UserSetDefaultSelector
Current User Set UserSetSelector
Load Configuration UserSetLoad
Save Configuration UserSetSave
Device Built-In Self deviceBISTStatus
Test Status
LED Color deviceLEDColorControl
Temperature DeviceTemperature
Refresh refreshTemperature
Temperature
Feature
Select the User-defined Configuration space
UserSet4 to save to or load from features
settings previously saved by the user.
Select the User-defined Configuration space
UserSet5 to save to or load from features
settings previously saved by the user.
Select the User-defined Configuration space
UserSet6 to save to or load from features
settings previously saved by the user.
Select the User-defined Configuration space
UserSet7 to save to or load from features
settings previously saved by the user.
Select the User-defined Configuration space
UserSet8 to save to or load from features
settings previously saved by the user.
Allows the user to select between the
factory set and 1 to 8 user sets to be loaded
at power up
Points to which user set (1-8) or factory set
that is loaded or saved when the
UserSetLoad or UserSetSave command is
used
Loads the camera configuration set
specified by the User Set Selector feature, to
the camera and makes it active. (W)
Saves the current camera configuration to
the user set specified by the User Set
Selector feature. The user sets are located on
the camera in non-volatile memory. (W)
Determine the status of the device using the
'Built-In Self Test'. Possible return values
are device-specific. (RO)
Displays the status of the LED on the back
of the camera. (RO)
Displays the internal operating temperature
of the camera. (RO)
Press to display the current internal
operating temperature of the camera.
Description Device
Version
& View
1.00
Beginner
1.00
Beginner
1.00
Beginner
1.00
Beginner
1.00
DFNC
Beginner
1.00
DFNC
Beginner
1.00
DFNC
Beginner
1.00
DFNC
Beginner